>> Home

Tuesday, May 8, 2012

Get the Air Moving in Your Kitchen & Bathrooms


While it’s usually not given a whole lot of thought, appropriate ventilation in the kitchen and bathroom is important for a variety of reasons. Most people consider this a utilitarian component of the home, but there are a surprising variety of options for both the kitchen and bathroom. Let’s look at some of the things to consider when weighing your product solutions for these areas of your home.

Kitchen ventilation has come a long way since the old recirculation fans with wire mesh screens or above-the-range microwave vents of yore. Nowadays, the vent fan is either cleverly disguised in cabinetry or a central aesthetic component of the kitchen. When locating the vent hood, be sure to consider height so that it accomplishes two main objectives: to draw away smoke and exhaust for better indoor air quality; but also to avoid being an obstacle while cooking at the range. You want it to be just the right height so it works for you. We always coordinate this detail between the client, designer, and project craftsman onsite before installation. Also consider the strength of the motor. You want it to be strong enough to draw the exhaust and get it out of the house, but not too strong so as to draw too much of the conditioned air outside. This is usually decided during the project design phase. Finally, you want the right look so the unit appears part of the design and not just an afterthought.
            
Like kitchen ventilation, bathroom ventilation has come a long way in recent years. There are a wide variety of products to choose from, such as: standard ceiling mounted fans (but they are much better these days), fans hidden in recessed ceiling lights, wall mounted fans, and small fans in multiple locations with a remote motor. These all operate in different ways and have different cost levels, so they should be discussed as your project is being designed and planned. We always weigh the pros and cons with our clients during design so that they end up with the right solution. Placement of the units in the bathroom is also important to successfully draw all of the moist air from the bathroom to prevent mildew. This detail is always reviewed during our pre-drywall walk-throughs with clients to make sure everything is in the right place and to their liking. A central component of this walk-through is to make sure that when the project is complete, everything works as intended and looks well-planned.
            
So there is a lot to consider when planning kitchen and bathroom ventilation for your remodeling project. With some careful thought and preparation, you can have practical results and an aesthetically pleasing space.

Tuesday, March 27, 2012

Reduce Your Use – Classic’s Tips For Saving Energy (And Money) At Home

As a design-build remodeling firm with five LEED APs on staff, we are firm believers in finding ways to incorporate energy conservation into our clients’ projects. So why focus on the reduction of energy use? It’s a complicated subject, but it can be boiled down to reducing a home’s energy costs and providing a more comfortable space. There are three keys areas of focus: 1) address the simple things first, 2) consider a product’s efficiency before its purchase, 3) have a thorough review of the more complex systems that are available. At Classic, these items are all addressed during the design and planning phase of your project.

Let’s start with the simple things first.


  • Turn off the lights when not in use. Advanced lighting systems can assist with this by being programmed to turn on and off at certain times. Sensors can also be installed to turn on and off when someone enters or leaves a room.
  • Switch to more efficient bulbs. Efficient bulbs can range from compact fluorescent to more high-performance LED fixtures.
  • Seal any gaps where unconditioned exterior air intrudes into the home or conditioned interior air escapes. This situation puts more demand on a home’s heating and air system, which results in more use of electricity.
  • Ensure your home is properly insulated. While addressing how air tight the home is, it is also important to consider insulation. Review the existing insulation to see if there is enough and if any is missing. You may also consider the installation of sprayed foam insulation in the attic – which can greatly reduces the temperature differential between the conditioned space below and the attic above. The application is very technical so it is important to make sure that a professional is hired to perform this work.

Before making major purchases for any remodeling project, it is important to consider the energy efficiency of the product. Carefully review the specifications of the products to assess how much they can save in electricity costs over the life in the product.

  • Windows and Doors. Your design-build professional can assist you with understanding the window-door ratings for energy efficiency and solar heat gain.
  • Appliances. Always look for an Energy Star rating and review the electricity savings tab on the appliance. Most other products these days also have energy ratings in some form – so always review the packaging carefully.


When considering the more advanced systems of a home it is important to consider how they impact a home’s energy efficiency.

  • Water Heaters. If an old electric water heater needs replacing, consider installation of a tankless gas-fired water heater. Unlike tr aditional tank heaters, tankless heaters do not store water at a constant temperature. Instead they heat on demand as needed. This greatly reduces electricity use since they are gas-fired. If you do opt for an electric tank heater, try to locate it with the building’s conditioned space in order to lessen the demands on the unit to counter the unconditioned air surrounding it.
  • HVAC Systems. The heating and air conditioning system of a home is also one of the biggest consumers of electricity. Explore the many options, but it is best to select higher quality units with a high SEER (Seasonal Energy Efficiency Ratings) rating, essentially a measure of its efficiency. It is also critical that all ductwork is tightly sealed so that no conditioned air is wasted. There are more advanced system for building conditioning, such as geothermal systems which utilize the constant temperature in the earth, but generally these systems are cost prohibitive unless one incorporates them in a new home mortgage.
  • Solar. To take it to another level, homeowners might also consider solar systems for their home. There are two types of solar systems to consider: solar thermal and solar photovoltaic (PV). Solar thermal can be used to help heat a home or its water supply. Solar PV is used to generate electricity for use in the home. While these systems can be expensive, it is important to consider how much electricity they can save homeowners – and potentially event create excess electricity. Precise figures and site data should be reviewed to make sure either is a feasible option.
There are countless options to consider when planning your remodeling project, so we always try to find a balance between efficiency and budget. We incorporate many subtle things into our building practices that improve efficiency, so we try to make the client knowledgeable of those as well. Through a shared goal of reducing electricity use and providing a comfortable home, we feel that we can satisfy our clients while also making a long-term improvement for the environment.

Friday, February 17, 2012

Improving the Design-Build Process for Clients - How Classic is Getting 'Smart'



In the last several years, our company has witnessed a great deal of change in how smart devices can improve our clients’ enjoyment of the design-build experience. At Classic, we have used two devices in particular to help us transform the way we communicate with our customers: the iPhone and the iPad.



The iPhone:

It’s now hard to think about how we got along without such a marvelous device. It has combined what were once separate communication devices - a phone/texting device and an email platform (formerly laptops) - allowing us to respond more quickly to questions or concerns our customers might have about their project. This centralization of communication creates much less confusion.


Apple has also bundled a camera into the device, which provides us with the ability to send pictures from the field to customers if a question arises. No longer is it necessary to schedule a meeting to review minor details, since this may all be completed now through the device.


Finally, with the iPhone we have complete and live access to our contact database. If we have a salesperson in the field who needs an alternate phone number for a client, they have the information with them. It also simplifies mapping and directions for our salespeople and project manager, which is a crucial feature when projects span the greater metropolitan area. The iPhone also allows access to the ever-expanding world of industry apps. A variety of apps have already been created to aid with everything from estimating, calculating material quantities, and matching paint colors. New apps are constantly being developed and will only continue to offer new ways for us to improve how we do business.


The iPad:

Like the iPhone, the iPad has allowed us to centralize our written communication systems – but with a much better format because of a larger screen. It is now very simple to respond to even a lengthy email in a short amount of time.


One of the nicest features of the iPad is the ability to present plan drawings and 3D renderings in full color, either in a customer’s home or here in our showroom using Apple TV with a large monitor. The ability to present in this fashion greatly enhances the customer’s ability to review their project in a much more interactive way that makes more sense than on paper.


The iPad also allows us to have complete and live access to all of our current project data using Dropbox – an innovative web based tool which links the devices to the data on our company server. So if a question arises onsite, we have access to the right information. No need to lug around a binder full of paper!

But, one of the most useful features of the iPad is the ability to simplify the product selection process. This has always been one of the most challenging areas of our business – for our customers and for us – because of the sheer number of products available. In years past we would visit product showrooms, which was time consuming and overwhelming for the client. The iPad has provided a way for us to create product catalogues and then make thoughtful recommendations based on our customer’s taste and our experience. We then can email them a summary of their selections and have one complete list – including photos. We are even working on developing a web based app which we can further customize, making the process even simpler.


Apple’s iPhone and iPad have had a tremendous impact on how we conduct business with and for our clients. Each has streamlined processes so that the remodeling experience is much more interactive and enjoyable. We look forward to pursuing new technologies which expand the capabilities of these devices and enhance our customer’s experience.

Monday, November 21, 2011

A Classic Renovation Helps a Philanthropic Mission

Classic Remodeling recently completed a major renovation project in the downtown area. We were excited about this project for a couple of reasons – in part because of the nature of the work itself, but also because the result of our work would benefit a charitable organization in the community. Our client on this project, the MUSC Foundation, is an organization that supports education, research, patient care and other programs at MUSC.

The Foundation owns a rental property on Ashley Avenue and uses the rental income as one means of support for its programs. The goal for this renovation was to find a way to make the property more attractive to potential renters, thereby maximizing the benefit to the Foundation. That’s where we came in.

Every project has its share of challenges, and projects in the downtown area tend to come with their own unique issues. At Classic, we look at those challenges as opportunities to do what we do best – complete superior renovations on time and on budget.

This property is located within the historic district and falls under the jurisdiction of the Charleston Board of Architectural Review (BAR). The BAR requires that any renovations to properties within this district must be appropriate and maintain the historic character of the building. So, all changes to the home had to be approved by the BAR before work could commence. Navigating the BAR’s approval process can be a daunting task, but through experience we’ve learned the right questions to ask to make the process as smooth as possible. We believe as your renovation expert, it’s our job to manage that process for you.

Our next challenge - transforming this home into a renter’s dream.

Due to the home’s age, we had to be sensitive to the potential presence of lead-based paint. This is a common issue with older homes and should not be taken lightly. Our EPA-certified staff ensured that the project was handled with the utmost care.

The home’s exterior got a facelift, which included repairing siding and adding new windows, a fresh coat of paint, and a new roof.

An addition that was added at some point to the back of the home that housed the bedrooms and kitchens was not structurally sound and had to be completely rebuilt.

Inside, each apartment got a total makeover. The original floor plan included a sitting room, a living room, bedroom, bath, and kitchen. We reconfigured the space to make it more desirable, converting the extra sitting room in each apartment to a much more useful second bedroom.

The existing hardwood floors were refinished and we laid new tile floors in the baths and kitchens. Both apartments were outfitted with new kitchen appliances and bathroom fixtures.

In spite of the challenges that accompanied this project, the results speak for themselves. We maintained the property’s historic character and transformed the space (without adding square footage) making it more functional and attractive to potential renters. Finally, the project was completed in record time – just under 2 months – a remarkable feat considering the challenges!

Friday, October 21, 2011

Delivering on Classic's Promises

You’ve decided to remodel, hired Classic, made all your design decisions and approved the final plans for your project – now what?

Now Cava Compton takes over. Cava is Classic’s Project Manager, responsible for making sure that what has been designed is delivered as promised.

When a project enters the construction phase, Cava, the project craftsman and I do a walk-through and go over all aspects of the project in the space. Cava then puts together a project schedule and makes sure the budget is followed. Not a small task, but she’s up to the challenge, “I love that each day is different. I like getting out in the field and the quick pace means it’s never boring!”

On a “typical” day you’ll find her checking on the status of each job, meeting with project craftsmen, resolving issues, screening and coordinating subcontractors, scheduling inspections, shopping for and ordering materials and fielding questions from clients. As you might imagine, she keeps pretty busy and is seldom seen without her cell phone.

Says Cava, “I try to be as accessible as possible to my clients. You have to remember that you are working on a home and not a job site. How we treat our clients is one of Classic’s greatest strengths, and the best work comes out of these relationships.”

Cava is also responsible for quality control, and our guys in the field work with her to make sure that everything we do is up to Classic’s standards. She and the project craftsman assigned to the job work as a team to keep the project on track. “Because we can be in a client’s home for a while, depending on the project, we really form a bond – the client, project craftsman and I – and a good relationship makes for a smooth project,” she says.


She stays with the job until it is ready for the client to move in. “When we’ve finished with the walk-throughs and punch list and it’s time to hand over the space to the client it’s a great day, but always a little sad. It’s nice that at Classic most of our clients come back with future projects, so we’re able to work with them again.”

And judging by the feedback we get from our clients they feel the same way. Says a client from Mt. Pleasant, “Cava is a really great project manager. She was always available to listen and to help with any questions. I really felt like she was taking care of us and she helped to make our first remodeling experience an exceptionally great one.”

Friday, September 30, 2011

Home Addition, Take Two

The Turner family came to us with a beautiful house that needed to function better.

The home had an existing addition off the back that housed a master bedroom, tiny master bath, and a strangely long and narrow closet. The space was not optimized and the appearance from the backyard was lacking.

The Turners wanted a new addition that would accommodate a larger bedroom, bath and closet. In addition to this interior work, they wanted to improve the appearance of the back of the property with a beautiful outdoor space that they could use for family time and entertaining.

We worked with the couple to design and build a master addition and outdoor area that met their needs. The project, of course, had its challenges. We took care to ensure that the new addition melded with the old. We were able to tie in everything nicely with the roof lines so as not to detract from the integrity of the home’s original structure. We were also able to deliver more square footage for the master bath while keeping the look from the back of the house symmetrical.

The result is a home that better reflects the Turners and how they live. The master bedroom is larger and includes a sitting area. The luxurious master bath is built for two, and there is plenty of closet space. Outside, where there was once a tired deck, there is now a large living area (truly an outdoor living room), an outdoor kitchen perfect for entertaining and a beautiful stone patio complete with built-in stone planters.

It’s what every addition should be - increased square footage that enhances the beauty and functionality of a home while looking like it has been there all along.

View from the Backyard - Before and After; Outdoor Spaces













Friday, August 26, 2011

Classic’s Small Projects and Repairs Team


Rotten siding, a leaky shower, flaking exterior trim – not exactly what springs to mind when you think of Classic and “Dreams You Can Live In.” These small projects, however, are part of a home’s upkeep and an area where Classic excels. And while we call these jobs “small” we do not mean they are unimportant. We see these projects as opportunities to improve the appearance and functionality of your home - so important, in fact, that we have created a Small Projects and Repairs Team which specializes in these types of jobs.

Managing the Small Projects and Repairs Team is Jason Wagner, who has been with Classic for 11 years and in the construction business for over 20. Jason began working construction in high school, helping his uncles with framing and masonry during the summers. Jason continued in the field after college, working in several disciplines and starting his own construction business in Pittsburgh before deciding to move south.

Jason started at Classic as an in-house painter and dry wall installer, quickly moved on to running his own kitchen and bath jobs, and eventually found himself running large-scale remodels and additions.

Now he is bringing all of this experience to Classic’s Small Projects and Repairs Team. Covering everything from siding and painting to replacing fixtures in a bath, the Team is dedicated to helping home owners with upkeep and sprucing up.

The Process
One of the goals of the Small Projects and Repairs Team is to make the whole process as easy as possible for the homeowner, from the initial meeting through completion. Jason explains the process:

When a prospective client calls we schedule an initial meeting so I can come out to the house and see the job. I bring everything I might need to this meeting and am prepared to do a thorough investigation. Some guys will come to the house, take a quick look and provide an estimate based on limited information only to have to come back, survey further and amend the estimate once the original bid has been accepted.

I’ll go up on the roof, into the crawl space, whatever is necessary to give the homeowner a complete estimate with minimal interruption. Many times I can provide the estimate right then or email the homeowner shortly after to expedite the process. I’ll follow up with a phone call to walk the client through the pricing to make sure they understand everything and to answer any questions.


Then we’ll set a schedule and get to work. When people are doing these types of jobs they want to get it started and get it done! We strive to get the job done quickly and to minimize our impact on our clients’ lives. For example, we order all of the materials needed for the job before getting started – no one wants their house torn up with no progress being made, waiting for deliveries.


We keep everything on schedule and on budget and we don’t leave a job site until our client is happy. No job is ‘done’ until it is completed to our client’s satisfaction and to Classic’s own high standards.


The Difference
We realize that many of these jobs are expenses that people don’t see coming and are issues that aren’t much fun to deal with. Keeping that in mind, we provide an experience that helps put clients at ease. Says Jason,

Information
We do not simply put a band-aid on the problem, quoting the lowest possible price just to get the job. With this approach you get a quick, cheap fix, but you’re stuck dealing with the same issue over and over. We find the cause, and when we fix a problem you don’t have to worry about it again. Anybody can throw on a band-aid. What Classic gives you is a thorough understanding of what is happening and a complete solution.


Communication
It is extremely important to us that the client knows what is happening with their project every step of the way. Each job has a dedicated project manager who remains on site for the duration of the job and I stay involved throughout the process. We have learned that different clients like to communicate in different ways, so we make updates available in person, over the phone and in writing.


Reputation
Classic’s reputation for quality and service extends to small projects and repairs, as does our warranty – 8 years on structural work, 5 years on systems and 2 years on finishes. These are practically unheard of in our industry (many businesses provide 1 year on each), but we’re proud to stand by our work. There’s a saying in the shop, ‘There are industry standards and then there are Classic standards’ – we set the bar pretty high around here.


While these types of jobs might be more necessity than the stuff dreams are made of, with Jason and our Small Projects and Repairs Team at least you can rest easy knowing they have been done well.